All public logs

Combined display of all available logs of The Imaging Source Knowledgebase. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 07:57, 28 October 2024 Stefan geissler talk contribs created page File:Imx290.zip (libcamera configuration file for imx290 sensors)
• 07:57, 28 October 2024 Stefan geissler talk contribs uploaded File:Imx290.zip (libcamera configuration file for imx290 sensors)
• 08:32, 24 October 2024 Stefan geissler talk contribs created page Streaming across different subnets (Created page with "If the GigE camera is located in one subnet, but the software with which the video is to be displayed is located on a PC in another subnet, then some configurations must be done. The The Imaging Source GigE camera is used with the GenTL Producer from [https://www.theimagingsource.com/en-us/support/download/ The Imaging Source Download] An example network configuration can look like this: Computer with the display program: Network adapter IP is 192.168.2.7 Default g...") Tag: Visual edit: Switched
• 12:12, 29 July 2024 Stefan geissler talk contribs created page Activate Debug Output in IC Capture, IC Imaging Control 3.5 (Created page with "The causes of some error messages in IC Capture and IC Imaging Control 3.5 are very difficult to determine. In particular, the reasons for the “Startlive failed” or “The live mode could not be started...” error messages are difficult to obtain. It is possible to get a debug output from IC in a text file. Please add following entry in the registry at <code>[HKEY_CURRENT_USER\Software\The Imaging Source Europe GmbH\IC3.0]</code> <code>"LibraryLogLevel"=dword:fff...") Tag: Visual edit: Switched
• 11:00, 25 July 2024 Stefan geissler talk contribs created page Using 22er, 42er and 72er Cameras in Linux (Using The Imaging Source USB 2 CMOS cameras in Linux) Tag: Visual edit: Switched
• 14:57, 10 July 2024 Stefan geissler talk contribs created page DFG/USB2pro in Linux (Created page with "The Kernel 4.18 or 4.19 (not 4.20) or above have the driver for DFG/USB2pro built in. The tiscamera modules can show the DFG/USB2pro, but unfortunately the video norm and input channel properties are missing. But you can set these properties with v4l2-ctl (paket v4l-utils), before starting your application. The possible input channel settings are v4l2-ctl --set-input 0 // that is Compsite v4l2-ctl --set-input 1 // that is S-VHS The possible video norms, depending o...") Tag: Visual edit: Switched
• 10:11, 9 July 2024 Stefan geissler talk contribs created page MIPI Cameras on Raspberry PI5 (Created page with "For an overview over supported camera type, open <nowiki>https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README</nowiki> and search for imx219. You will get a list of available kernel modules. Only 64-bit installations are supported. The package <code>libcamera0.1</code> has to be installed. It should be installed per default. The file <code>/boot/config.txt</code> should contain/omit the following settings: <syntaxhighlight> dtparam=i2c_param=on dt...") Tag: Visual edit
• 11:54, 8 July 2024 Stefan geissler talk contribs created page Enumeration Properties of IC 4 (Created page with "Enumeration properties are properties that expect and return a string and provide a list of valid strings for selection. For example, the pixel format of a camera can contain "Mono8", "Mono16", "BayerRG8" etc. The DevicePropertyMap.FindEnumeration() function is used to obtain the selection list. This receives the name of the property as a parameter, e.g. "PixelFormat", "BalanceWhiteMode" etc. The function returns an enumeration. C# <syntaxhighlight lang="C#"> var forma...") Tag: Visual edit
• 15:51, 2 July 2024 Stefan geissler talk contribs created page USB 2.0 CCD cameras do not provide images (Created page with "The cameras of the 21AU04, 21BU04, 31AU03, 31BU03, 41AU02 and 41BU02 series are unfortunately incompatible with Intel® USB 3.0 controllers, meaning that they do not run at full frame rate. These cameras only deliver images when the frame rate is reduced. Unfortunately, this issue cannot be solved. For further questions, please use our [https://www.theimagingsource.com/en-de/company/contact/ contact form] de:USB_2.0_CCD_Kameras_liefern_keine_Bilder zh-tw: z...") Tag: Visual edit
• 07:44, 16 May 2024 Stefan geissler talk contribs created page Impossible to focus, no sharp image (Created page with "thumb|150x150px|Technical drawing of the 5mm distance ring It may happens that it is not possible to get a sharp image with a The Imaging Source camera and a normal C/CS mount lens. The reason for this is usually the missing 5mm distance ring, which must be fitted between the camera and the lens. This black ring is always screwed onto the camera when it is delivered. If the protective cap that sits on the ring is unscrewed instead of pulled off...") Tag: Visual edit
• 07:40, 16 May 2024 Stefan geissler talk contribs created page File:Distringmounted.png
• 07:40, 16 May 2024 Stefan geissler talk contribs uploaded File:Distringmounted.png
• 07:39, 16 May 2024 Stefan geissler talk contribs created page File:Distringunmounted.png
• 07:39, 16 May 2024 Stefan geissler talk contribs uploaded File:Distringunmounted.png
• 07:38, 16 May 2024 Stefan geissler talk contribs created page File:Cap plus ring.png
• 07:38, 16 May 2024 Stefan geissler talk contribs uploaded File:Cap plus ring.png
• 07:37, 16 May 2024 Stefan geissler talk contribs created page File:Distancering.png
• 07:37, 16 May 2024 Stefan geissler talk contribs uploaded File:Distancering.png
• 09:07, 19 March 2024 Stefan geissler talk contribs created page Lens opening angle of the DFK AFU420-L62 (Created page with "The opening angle of the [https://www.theimagingsource.com/en-us/product/zoom-autofocus/afu/dfkafu420l62/ DFK AFU420-62] 42 megapixel autofocus camera is 68° to 72° depending on the focus setting. Category:Manuals For further questions, please use our [https://www.theimagingsource.com/en-de/company/contact/ contact form] de:Öffnungswinkel_der_DFK_AFU420-L62 zh-tw: zh-cn:") Tag: Visual edit: Switched
• 09:50, 13 March 2024 Stefan geissler talk contribs created page Import IC Capture Camera Configuration (Created page with "IC Capture is often used to configure cameras. You would like to use this configuration in your own program. Since version 2.5.1557.4007, the "Export device configuration" option has been available in the "File" menu. This creates an XML file for the currently selected camera, which can be loaded with the "LoadDeviceStateFromFile()" functions of IC Imaging Control 3.5. center This only works with IC Imaging Control 3.5. If...") Tag: Visual edit: Switched
• 09:35, 13 March 2024 Stefan geissler talk contribs created page File:IC Capture export configuration.png
• 09:35, 13 March 2024 Stefan geissler talk contribs uploaded File:IC Capture export configuration.png
• 10:28, 11 March 2024 Stefan geissler talk contribs created page Cleaning Sensors (Created page with "Here are some tipps how to clean the sensor of a The Imaging Source camera. # Compressed Air From Air-Blower Compressed air is usually sufficient to remove most foreign bodies from the surface of the CCD chip. We recommend using an air-blower, such as from Edmund Optics, and not compressed air from an aerosol. Compressed air from an aerosol may contain other chemicals (propellant, water, oil etc.) which could damage the surface of the CCD. For details, see www.edmundo...") Tag: Visual edit
• 12:44, 29 February 2024 Stefan geissler talk contribs created page Create Docker Container with tiscamera and tcam-capture (Created page with "Create a directory "tiscamera" and copy the following needed deb filesinto it: * tcamdutils_*_amd64.deb * tiscamera_*_amd64_ubuntu_1804.deb from [https://www.theimagingsource.com/en-us/support/download/ The Imaging Source Downloads] Now create a "Dockerfile" with following content: <pre> FROM ubuntu ARG DEBIAN_FRONTEND=noninteractive RUN apt-get -y update RUN apt-get -y install libgstreamer1.0-0 RUN apt-get -y install gstreamer1.0-tools COPY ./tiscamera_1.0.0.4005...")
• 12:21, 29 February 2024 Stefan geissler talk contribs created page Category:Programming (Created blank page) Tag: Visual edit
• 12:03, 29 February 2024 Stefan geissler talk contribs created page Getting Started with Python and Camera (Created page with "With Python, as well as with C, C++ and C# you can do everything needed: * Display a video stream * Capture single images, manual and automatiaclly * Capture video files * Set all camera properties === Windows: === Installation: python3 -m pip install imagingcontrol4 Driver : The GenTL Producer for your The Imaging Source Camera from https://www.theimagingsource.com/en-us/support/download/ Documentation: [https://www.theimagingsource.com/en-us/documentation/ic4pytho...") Tag: Visual edit
• 11:02, 29 February 2024 Stefan geissler talk contribs created page GigEVision Ports (Created page with "GigE Vision consists of a control and a streaming part. Only the control connection is claiming a static port on the device end (UDP 3956), which is also registered with IANA. The control connection source port as well as the streaming connection port(s) are dynamically allocated from the ephemeral port range 49152 through 65536. It may happen a firewall blocks UDP from the ephemeral port range 49152 through 65536. If so, the camera can be found and configured, but the...") Tag: Visual edit
• 12:59, 27 February 2024 Stefan geissler talk contribs created page Gige Camera is not available (Created page with "If a The Imaging Source GigE ethernet camera is not available in a corresponding program, there may be various reasons for this. === Driver === For IC Capture, IC Imaging Control 3.5 and other DirectShow based cameras, the GigE driver from https://www.theimagingsource.com/en-us/support/download/icwdmgigetis-3.8.0.4597/ must be installed. For IC Imaging Control 4 based programs, the GenTL Producer from https://www.theimagingsource.com/en-us/support/download/ic4gentlprod...") Tag: Visual edit
• 12:58, 27 February 2024 Stefan geissler talk contribs created page File:Gigeconfig-ic4.png
• 12:58, 27 February 2024 Stefan geissler talk contribs uploaded File:Gigeconfig-ic4.png
• 12:51, 27 February 2024 Stefan geissler talk contribs created page File:Gigeconfig-correctip.png
• 12:51, 27 February 2024 Stefan geissler talk contribs uploaded File:Gigeconfig-correctip.png
• 12:50, 27 February 2024 Stefan geissler talk contribs created page File:Gigeconfigtaskleiste.png
• 12:50, 27 February 2024 Stefan geissler talk contribs uploaded File:Gigeconfigtaskleiste.png
• 14:33, 23 February 2024 Stefan geissler talk contribs deleted page Category:Anleitungen (content was: "", and the only contributor was "Stefan geissler" (talk))
• 14:01, 23 February 2024 Stefan geissler talk contribs created page Category:Anleitungen (Created blank page)
• 13:47, 23 February 2024 Stefan geissler talk contribs created page Camera ist not available (Created page with "The driver for the camera or video converter is installed perfectly, but programs like IC Capture, IC Measure or other programs do not list the camera. If the "Windows Privacy Settings for Camera" are enabled, the access to the camera is denied and programs are not able to list a video capture device. At https://support.microsoft.com/en-us/windows/manage-app-permissions-for-your-camera-in-windows-87ebc757-1f87-7bbf-84b5-0686afb6ca6b is shown, how to manage these setti...") Tag: Visual edit
• 09:23, 23 February 2024 Stefan geissler talk contribs created page Despite TIS USB camera driver is installed the Windows standard driver is still in use (Created page with "It can happen that the USB camera driver is installed from The Imaging Source download page, but is not used by Windows or the Windows Device Manager. The camera list then looks like this in IC Capture: File:Kamera mit Windows Standard Treiber.png The camera serial number, the firmware version and the driver version that IC Capture 2.5 displays usually in the camera selection dialog are missing. Another consequence is that many camera properties such as trigger, to...") Tag: Visual edit
• 09:20, 23 February 2024 Stefan geissler talk contribs created page File:Ic-capture-driver-correct.png
• 09:20, 23 February 2024 Stefan geissler talk contribs uploaded File:Ic-capture-driver-correct.png
• 09:19, 23 February 2024 Stefan geissler talk contribs created page File:Device-manager-7.png
• 09:19, 23 February 2024 Stefan geissler talk contribs uploaded File:Device-manager-7.png
• 09:17, 23 February 2024 Stefan geissler talk contribs created page File:Device-manager-6.png
• 09:17, 23 February 2024 Stefan geissler talk contribs uploaded File:Device-manager-6.png
• 09:16, 23 February 2024 Stefan geissler talk contribs created page File:Device-manager-5.png
• 09:16, 23 February 2024 Stefan geissler talk contribs uploaded File:Device-manager-5.png
• 09:15, 23 February 2024 Stefan geissler talk contribs created page File:Device-manager-4.png
• 09:15, 23 February 2024 Stefan geissler talk contribs uploaded File:Device-manager-4.png
• 09:13, 23 February 2024 Stefan geissler talk contribs created page File:Device-manager-3.png
• 09:13, 23 February 2024 Stefan geissler talk contribs uploaded File:Device-manager-3.png