Pin Assignment of Open End Trigger Cables
Jump to navigation
Jump to search
6 Pin Connector
The article code is Gige23/Trig/OE/3
| Pin | Signal | I/O | Remarks | Min | Typical | Max | Unit | Color |
|---|---|---|---|---|---|---|---|---|
| 1 | Gige Power | P³ | 11.0 | 12.0 | 13.0 | V | white | |
| 2 | Trigger In (+) | I³ | Optocoupler Signal | 3.3² | 24.0² | V | brown | |
| 3 | Trigger In (-) | I³ | Optocoupler Ground | green | ||||
| 4 | Strobe Out | O³ | Open Drain | 24.0¹ | V | yellow | ||
| 5 | GND I/O | G³ | External Ground Open Drain | grey | ||||
| 6 | GND DC | G³ | External Ground Power | pink |
In order to assemble a connection cable the Hirose plug HR10A-7P-6S(73) is needed.
12 Pin Connector
The article code is H12/Trig/OE/3.
| Pin | Signal | I/O | Remarks | Min | Typical | Max | Unit | Color |
|---|---|---|---|---|---|---|---|---|
| 7 | GND I/O | G³ | Extrernal Ground Open Drain | green | ||||
| 10 | Strobe Out | O³ | Open Drain | 24.0¹ | V | white | ||
| 11 | Trigger In (+) | I³ | Optocoupler Signal | 3.3² | 24.0² | V | grey | |
| 12 | Trigger In (-) | I³ | Optocoupler Ground | red |
Attention: Use the above mentioned pins only!
In order to assemble a connection cable the Hirose plug HR10A-10P-12S(73) is needed.
¹ Max 0.2A for Open Drain
² Min 3.5 mA necessary power
³ G:Ground O: Output I: Input
For further questions, please use our contact form