New pages
Jump to navigation
Jump to search
- 08:32, 24 October 2024 Streaming across different subnets (hist | edit) [1,839 bytes] Stefan geissler (talk | contribs) (Created page with "If the GigE camera is located in one subnet, but the software with which the video is to be displayed is located on a PC in another subnet, then some configurations must be done. The The Imaging Source GigE camera is used with the GenTL Producer from [https://www.theimagingsource.com/en-us/support/download/ The Imaging Source Download] An example network configuration can look like this: Computer with the display program: Network adapter IP is 192.168.2.7 Default g...") Tag: Visual edit: Switched
- 12:12, 29 July 2024 Activate Debug Output in IC Capture, IC Imaging Control 3.5 (hist | edit) [1,167 bytes] Stefan geissler (talk | contribs) (Created page with "The causes of some error messages in IC Capture and IC Imaging Control 3.5 are very difficult to determine. In particular, the reasons for the “Startlive failed” or “The live mode could not be started...” error messages are difficult to obtain. It is possible to get a debug output from IC in a text file. Please add following entry in the registry at <code>[HKEY_CURRENT_USER\Software\The Imaging Source Europe GmbH\IC3.0]</code> <code>"LibraryLogLevel"=dword:fff...") Tag: Visual edit: Switched
- 11:00, 25 July 2024 Using 22er, 42er and 72er Cameras in Linux (hist | edit) [2,276 bytes] Stefan geissler (talk | contribs) (Using The Imaging Source USB 2 CMOS cameras in Linux) Tag: Visual edit: Switched
- 14:57, 10 July 2024 DFG/USB2pro in Linux (hist | edit) [929 bytes] Stefan geissler (talk | contribs) (Created page with "The Kernel 4.18 or 4.19 (not 4.20) or above have the driver for DFG/USB2pro built in. The tiscamera modules can show the DFG/USB2pro, but unfortunately the video norm and input channel properties are missing. But you can set these properties with v4l2-ctl (paket v4l-utils), before starting your application. The possible input channel settings are v4l2-ctl --set-input 0 // that is Compsite v4l2-ctl --set-input 1 // that is S-VHS The possible video norms, depending o...") Tag: Visual edit: Switched
- 10:11, 9 July 2024 MIPI Cameras on Raspberry PI5 (hist | edit) [1,396 bytes] Stefan geissler (talk | contribs) (Created page with "For an overview over supported camera type, open <nowiki>https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README</nowiki> and search for imx219. You will get a list of available kernel modules. Only 64-bit installations are supported. The package <code>libcamera0.1</code> has to be installed. It should be installed per default. The file <code>/boot/config.txt</code> should contain/omit the following settings: <syntaxhighlight> dtparam=i2c_param=on dt...") Tag: Visual edit
- 11:54, 8 July 2024 Enumeration Properties of IC 4 (hist | edit) [1,632 bytes] Stefan geissler (talk | contribs) (Created page with "Enumeration properties are properties that expect and return a string and provide a list of valid strings for selection. For example, the pixel format of a camera can contain "Mono8", "Mono16", "BayerRG8" etc. The DevicePropertyMap.FindEnumeration() function is used to obtain the selection list. This receives the name of the property as a parameter, e.g. "PixelFormat", "BalanceWhiteMode" etc. The function returns an enumeration. C# <syntaxhighlight lang="C#"> var forma...") Tag: Visual edit
- 15:51, 2 July 2024 USB 2.0 CCD cameras do not provide images (hist | edit) [511 bytes] Stefan geissler (talk | contribs) (Created page with "The cameras of the 21AU04, 21BU04, 31AU03, 31BU03, 41AU02 and 41BU02 series are unfortunately incompatible with Intel® USB 3.0 controllers, meaning that they do not run at full frame rate. These cameras only deliver images when the frame rate is reduced. Unfortunately, this issue cannot be solved. For further questions, please use our [https://www.theimagingsource.com/en-de/company/contact/ contact form] de:USB_2.0_CCD_Kameras_liefern_keine_Bilder zh-tw: z...") Tag: Visual edit
- 07:44, 16 May 2024 Impossible to focus, no sharp image (hist | edit) [1,324 bytes] Stefan geissler (talk | contribs) (Created page with "thumb|150x150px|Technical drawing of the 5mm distance ring It may happens that it is not possible to get a sharp image with a The Imaging Source camera and a normal C/CS mount lens. The reason for this is usually the missing 5mm distance ring, which must be fitted between the camera and the lens. This black ring is always screwed onto the camera when it is delivered. If the protective cap that sits on the ring is unscrewed instead of pulled off...") Tag: Visual edit
